Sun-microsystems X6240 Manual do Utilizador descarregar pdf (Página 20)

8 Sun Blade X6240 Server Module Installation Guide • June 2008

Using a Dongle Cable for Testing

Your chassis ships with a dongle cable. The dongle enables you to plug devices

directly into the front of the server module for testing.

Caution – The dongle cable should be used only for configuration and service

purposes. It should be disconnected from the server module when the configuration

or servicing operation is completed.

If you have a dongle cable connected to a server module, it must be removed before

closing the door of a rack cabinet. The dongle cable may be damaged if it is not

removed before the cabinet door is closed.

▼ To Use a Dongle Cable for Testing

1. Insert the dongle cable into the universal connector port (UCP) on the server

module front panel. See

FIGURE 1-3.

2. Connect device to the dongle cable connections, as appropriate.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 71 72

Sem comentários

Sun-microsystems X6240 Manual do Utilizador Página 20