Sun-microsystems Ethernet MMF/UTP Adapter Manual do Utilizador Página 120

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 122
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 119
86 Sun PCI-Express Dual Gigabit Ethernet MMF/UTP Adapter Installation and User’s Guide June 2006
To Configure Bonding for Multiple e1000
Interfaces
1. Modify the /etc/modules.conf file for 2.4 kernels or the /etc/modprobe.conf
file for 2.6 kernels file by adding these lines:
where:
bond0 is the bonding device.
max_bonds is the number of bond interfaces to be created.
mode specifies the bonding policies.
miimon is the frequency in milliseconds that MII link monitoring will occur.
Refer to Linux documentation for more information.
2. Load the bonding driver:
3. Configure bond0 interface.
In this example, bond0 is the master of the two interfaces eth2 and eth3.
alias bond0 bonding
options bonding max_bonds=2 mode=4 miimon=1000
# modprobe bonding
# ip addr add 192.12.38.64/24 brd + dev bond0
# ip link set dev bond0 up
# ifenslave bond0 eth2 eth3
Vista de página 119
1 2 ... 115 116 117 118 119 120 121 122

Comentários a estes Manuais

Sem comentários