Sun-microsystems Ethernet MMF/UTP Adapter Manual do Utilizador descarregar pdf (Página 63)

Chapter 3 Configuring ipge and e1000 Driver Parameters 29

If the link partner is not capable of autonegotiation (when lp_autoneg_cap is 0),

the remaining information described in

TABLE 3-1 is not relevant and the parameter

value = 0.

If the link partner is capable of autonegotiation (when lp_autoneg_cap is 1), then

the speed and mode information is displayed when you use autonegotiation and the

link partner capabilities.

lp_cap_100hdx 0 = No 100 Mbit/sec half-duplex transmission

1 = 1000 Mbit/sec half-duplex

lp_cap_10fdx 0 = No 10 Mbit/sec full-duplex transmission

1 = 10 Mbit/sec full-duplex

lp_cap_10hdx 0 = No 10 Mbit/sec half-duplex transmission

1 = 10 Mbit/sec half-duplex

lp_cap_asm_pause 0 = Not asymmetric pause capable

1 = Asymmetric pause towards link partner capability

lp_cap_pause 0 = Not symmetric pause capable

1 = Symmetric pause capable

TABLE 3-1 Read-Only Link Partner Capabilities (Continued)

Parameter Description

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 121 122

Sem comentários

Sun-microsystems Ethernet MMF/UTP Adapter Manual do Utilizador Página 63