Sun-microsystems Ethernet MMF/UTP Adapter Manual do Utilizador descarregar pdf (Página 52)

18 Sun PCI-Express Dual Gigabit Ethernet MMF/UTP Adapter Installation and User’s Guide • June 2006

Rebooting the System

After verifying the adapter installation, use the boot -r command to perform a

reconfiguration boot on your system.

The reconfiguration boot attaches the driver to the adapter. You can now configure

the driver parameters for your Sun PCI-Express Dual Gigabit Ethernet adapter.

Installing the ExpressModule Adapter

The following instructions describe the basic tasks required to install the adapter.

Refer to your system installation or service manual for detailed ExpressModule

adapter installation instructions.

This section contains the following topics:

■ “To Install the ExpressModule Adapter Using Hot-Plug” on page 18

■ “To Verify the ExpressModule Installation” on page 19

▼ To Install the ExpressModule Adapter With

Power Off

1. Open the latch.

2. Insert the module.

3. Close the latch.

▼ To Install the ExpressModule Adapter Using

Hot-Plug

1. Insert the ExpressModule for the system blade into its corresponding slot.

2. Close the latch.

ok boot -r

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 121 122

Sem comentários

Sun-microsystems Ethernet MMF/UTP Adapter Manual do Utilizador Página 52